HP P9000 Business Continuity Manager User Guide

6. If there are no more additions to be made, press the F3=Exit key. To add a copy pair, press
the F5=Add key.
The created copy group (GRP1) is displayed in the Copy Group Selection List panel.
Defining the copy group ID and copy group attributes (BC)
To define a copy group:
1. Display the Discover/Define Configuration panel and choose 4 Copy Group Definitions.
The Copy Group Selection List panel displays.
2. Press the F5=Add key to add an BC copy group.
The Add Copy Group panel displays.
3. Specify Copy Group ID, Device Address Domain (for both Primary and Secondary), and Copy
Group Type (BC).
4. Press the Enter key.
The Setting C/T ID Attributes panel appears.
5. Specify a value for C/T ID (JNLG), and press the Enter key (this is optional for BC Z).
The Copy Group Pair Detail panel appears (in the initial status, no display line appears).
6. Press the F4=Attr key.
The Copy Group Attributes (BC) panel appears.
7. Specify copy group attributes (C/T ID and Preset Mode are optional, but required for the
ATTIME Suspend Function).
482 Using the ISPF panels