HP P9000 Business Continuity Manager User Guide

4. Specify the scan range using the device addresses (CU and CCA) as the remote scan
information.
NOTE: If 00 is specified for Start CU and FF is specified for End CU, information is displayed
for all logical devices in the target storage system.
5. Press the F6=Scan key to perform the remote scan.
A remote scan is executed. The CU Selection List for Edit devn panel displays.
NOTE: Business Continuity Manager automatically determines the model of the storage
system when a scan is performed, and displays the information in the Model column.
Assigning a dummy device number
NOTE: Although dummy device numbers must be unique within the Device Address Domain, the
dummy device number assigned through a remote scan can be the same as the device number for
a device (within a storage system) that is connected to the host.
To assign a dummy device number:
1. In the CU Selection List for Remote Storage Arrays panel, specify e in the AC column.
The Edit Device Number for CU panel displays.
474 Using the ISPF panels