HP P9000 Business Continuity Manager User Guide

The Description setting values can be changed. You can change the dummy device number
that has already been assigned to the NG scan target storage system, indicated by a percent
sign (%) next to the storage system serial number.
Creating a path set
Defining the inter-DKC logical path set
This section explains how to define the inter-disk controller logical path, using the inter-disk controller
logical path definition example shown in Figure 116 (page 439).
Figure 116 Inter-DKC logical path definition example
NOTE: Before defining a new path set, check the cable connection port number as described in
“Establishing a logical path” (page 456).
To define a new path set:
1. In the Discover/Define Configuration panel, choose 3 Path Set Definitions.
The Path Set Selection List panel displays.
Creating a path set 439