HP P9000 Business Continuity Manager User Guide

8. Use Remote Web Console to reconfigure the delta resync control paths required between the
Primary > Local and Local > Remote sites.
Operation is returned to normal.
NOTE: If during operation the status of a delta resync pair changes to HOLDTRNS, NODELTA,
or HOLDER, see “Actions to be Taken When the Delta Resync Function Cannot be Set Up or
Operated Successfully” (page 340).
Operating Procedure During a Local Site Storage System Failure (Nonvolatile)
The preparation and recovery procedures to be performed when the local site storage system is
in a nonvolatile failure state are the same as the procedures to be performed when a path failure
occurs between the primary site storage system and the local site storage system. See “Operating
Procedure During a Path Failure Between the Primary Site Storage System and the Local Site Storage
System” (page 338).
Operating Procedure During a Remote Site Storage System Failure (Volatile)
This subsection explains the procedure to perform when the remote site storage system is in a
volatile failure state.
Preparing
No action is required.
Recovering
1. Recover the remote site storage system from the failure.
2. From the primary site, execute the YKDELETE command for the delta resync pair.
330 Maintenance and Troubleshooting Operations