HP P9000 Business Continuity Manager User Guide

Table 50 How to Prepare the Configuration Files at Each Site (HyperSwap) (continued)
How to PrepareContentsFile Type
On the Secondary SiteOn the Primary Site
Not requiredDefine a path setPath set definition file
• An inter-control unit
logical path from the
primary storage system
to the local storage
system
• An inter-control unit
logical path from the
local storage system to
the primary storage
system
• An inter-disk controller
logical path from the
primary storage system
to the remote storage
system
• An inter-disk controller
logical path from the
local storage system to
the remote storage system
Define a path setNot required
• An inter-disk controller
logical path from the
remote storage system to
the primary storage
system
• An inter-disk controller
logical path from the
remote storage system to
the local storage system
Not requiredDefine a route listRoute list definition
file/Command device
definition file
• A route/command device
from the local storage
system to the remote
storage system
• A route/command device
from the primary storage
system to the remote
storage system
Define a route listNot required
• A route/command device
from the remote storage
system to the primary
storage system
• A route/command device
from the remote storage
system to the local
storage system
Transfer from the primary
site
Define a copy groupA Cnt Ac-S Z copy group
with the HyperSwap
attribute
Copy group definition file
Define a copy groupA Cnt Ac-J Z copy group
Define a copy groupA Cnt Ac-J Z copy group for
Delta Resync
180 Configuration Definitions