HP P9000 Business Continuity Manager User Guide

Table 48 Storage System Setting Items (HyperSwap) (continued)
RemarksDescriptionItem
Use Remote Web Console or Business
Continuity Manager for the setup.
Logical path
• An inter-control unit logical path
(bidirectional) must be established
between the primary and local
storage system.
• An inter-disk controller logical path
(bidirectional) must be established
between the primary and remote
storage system.
• An inter-disk controller logical path
(bidirectional) must be established
between the local and remote
storage system.
Use Remote Web Console for the setup.Add a delta resync control path
(bidirectional) between storage
systems.
Delta resync control path
Preparing the Configuration Files (HyperSwap)
Table 49 (page 178) lists the configuration files required for using Business Continuity Manager in
a 2DC configuration with HyperSwap and Continuous Access Journal for Mainframe configuration.
Table 49 Required Configuration Files (HyperSwap)
RemarksDescriptionItem
—Disk configuration definition files are
required on the primary storage
Disk configuration definition file
system, local storage system, and
remote storage system.
Set this item before starting a copy
operation.
The following files are required:Copy group definition file
• Copy group definition files for the
Cnt Ac-S Z copy groups with the
HyperSwap attribute
• Copy group definition files for the
Cnt Ac-J Z copy groups
The timer type of the Cnt Ac-J Z
copy group: Local
• Copy group definition files for the
Delta Resync pair
For the S-VOL of the Delta Resync
pair, specify the same journal
group as for the S-VOL of the
Continuous Access Journal for
Mainframe copy group, using a
different mirror ID.
178 Configuration Definitions