HP P9000 Business Continuity Manager Release Notes (T5253-96056, September 2011)

Table 3 Supported enhancements and features (continued)
New Features and EnhancementsItem
available (P9500). This function preserves a consistency of
a C/T group including a copy group for Open and a copy
group for MF.
When a local disk is scanned by YKSCAN command, the
capacity of volume is obtained in cylinder. Also the capacity
is obtained by YKQRYDEV.
Operation improvement
When generating a copy group definition, the volumes of
P-VOL and S-VOL are checked. When the capacity is not
obtained or their capacities are not equal, a warning screen
will be displayed.
BCM can use each function by the shown storage system.
Table 4 BCM function by storage system
Required firmware versionStorage systemFunction
60-05-00 or laterXP24000/XP20000Compatible FlashCopy linkage function is
enabled when the Cnt Ac-J copy pair is in
the DUPLEX status
70-01-23 or laterP9500
60-08-01 or laterXP24000/XP20000Compatible FlashCopy linkage using the
Preserve Mirror function when the Cnt Ac-S
copy pair is in the DUPLEX status
60-05-00 or laterXP24000/XP20000Delta Resync function using the Delta Resync
control path
60-03-00 or laterXP24000/XP20000Cnt Ac-J ATTIME suspend function under
4x4x4 Multi-Target configuration
60-06-00 or laterXP24000/XP200002DC Configuration with HyperSwap and Cnt
Ac-J
70-02-02 or laterP9500
60-06-00 or laterXP24000/XP20000Open/MF Consistency Preservation Function
70-02-5x or laterP9500
60-07-00 or laterXP24000/XP20000Suspend mode 'QUICK' with Cnt Ac-J
ATTIME suspend function
70-02-02 or laterP9500
70–01–62 or laterP95003DC Cascade configuration
70–01–62 or laterP95003DC Multi-Target configuration
70–01–62 or laterP9500Delta resync function
70–01–62 or laterP95004x4 configuration
70–02–02 or laterP95004x4x4 Multi-target configuration
BCM can use other functions by the storage system with the microcode shown by firmware levels.
Fixes
Table 5 Fixes
Applied OSApplied productsFixes
All supported operating systemsBC ManagerWhen the Fast Query function on ISPF
panel or the YKEWAIT command is
executed to a Shadow Image pair, the
4 Fixes