HP P9000 Business Continuity Manager Reference Guide (T5253-96058, September 2011)

Table 56 Contents of the Copy Group Attributes Panel (continued)
When effectiveCopy typeDescriptionItem
when setting an ATTIME suspend
time.
• NORMAL: Uses the NORMAL
ATTIME suspend function.
• CAJ(STEADY): Uses the CAJ
ATTIME suspend function. The
suspension is activated in
STEADY mode.
• CAJ(QUICK): Uses the CAJ
ATTIME suspend function. The
suspension is activated in QUICK
mode.
BCSpecify the copy pace when making
a copy pair (YKMAKE command) or
COPY PACE
• When the YKMAKE
command is executed
CA
resynchronizing a copy pair
(YKRESYNC command).
CAA
• When the YKRESYNC
command is executed
• NORMAL: The speed of the copy
operation improves. However,
update I/O load on P-VOL is
high, and this might affect the
I/O performance of the host.
• SLOW: Slows the speed of the
copy operation so that the effect
of the copy operation on the I/O
performance of the host is
minimal.
When the YKSUSPND
command is executed
BC
CA
Specify the write-protect mode for
the S-VOL (required).
For BC, PERMIT is the default. For
CA and TCA, PROTECT is the
default.
PROT MODE
CAA
CAJ
• PROTECT: Update of the S-VOL
is prohibited after a copy pair is
suspended (YKSUSPND
command is executed).
• PERMIT: Update of the S-VOL is
allowed after a copy pair is
suspended (YKSUSPND
command is executed).
When the YKQUERY
command is executed
CAJSpecify the consistency time mode
to be used when the copy type is
CAJ.
C/T TIME MODE
• JOURNAL: Uses the consistency
time committed to the restore
journal.
• VOLUME: Uses the consistency
time committed to the S-VOL.
• ASIS: Uses the consistency time
set according to the storage
system setting.
Discover/Define Configuration Panel (Configuration File Definition) 83