HP P9000 Business Continuity Manager Reference Guide (T5253-96058, September 2011)

Table 56 Contents of the Copy Group Attributes Panel (continued)
When effectiveCopy typeDescriptionItem
CAASpecify the error level that
determines whether all of the copy
ERROR LVL
• When the YKMAKE
command is executed
CAJ
pairs in the same C/T group are
• When the YKRESYNC
command with the
suspended (required for TCA and
CAJ).
VOLUNIT parameter
• VOLUME: When a failure occurs,
only the affected volumes are
suspended
or DEVN parameter
specified is executed
• GROUP: When a failure occurs,
all volumes in the same copy
group are suspended.
When the YKRESYNC
command is executed
CAASpecify the C/T group timer type
6
when performing copy operations
FORWARDTIMER TYPE
from the primary site to the
secondary site again, after
performing copying from the
secondary site to the primary site
(required for TCA).
• SYSTEM: Uses a timestamp to
maintain consistency.
• LOCAL: Uses the storage
system's internal clock to
maintain consistency.
• NONE: Does not maintain
consistency.
Specify the C/T group timer type
6
when performing copy operations
REVERSE
from the secondary site to primary
site (required for TCA).
• SYSTEM: Uses a timestamp to
maintain consistency.
• LOCAL: Uses storage system's
internal clock to maintain
consistency.
• NONE: Does not maintain
consistency.
Discover/Define Configuration Panel (Configuration File Definition) 81