HP P9000 Business Continuity Manager Reference Guide (T5253-96058, September 2011)

Table 54 Items in the Copy Group Detail Definition panel (continued)
When effectiveDescriptionItem
can be specified only in the Copy Group Detail Definition
panel).
• d: Deletes a copy group (this setting can be specified only
in the Copy Group Detail Definition panel).
• s: Displays a copy pair in the copy group. This setting
displays the Browse Copy Group Pair Detail panel (this
setting can be specified only in the Browse Copy Group
Detail Definition panel).
N/AGroup ID number of the copy groupGrp Num
This value corresponds to the value of n in CopyGroup.n.
. of the copy group structure.
When the YKMAKE
command is executed.
1
Specify the consistency group ID (hexadecimal).
This option cannot be specified for Continuous Access
Synchronous for Mainframe copy groups with the HyperSwap
attribute.
C/T ID
When the YKMAKE
command is executed.
1
Specify the subconsistency group ID (hexadecimal).sub
The number of copy pairs in the applicable C/T group.Pair(s)
When the YKMAKE
command is executed.
1
Specify S to register a storage system as the supervisor DKC.
You can only specify this for one storage system in a primary
site.
SPrimary
N/APrimary storage system serial numberS/N
If multiple storage systems exist for one C/T ID and sub C/T
ID combination, * is displayed to the right of the serial
number.
When the YKMAKE
command is executed.
1
Specify the arbitration command device of the primary site.
You do not have to specify this item for the supervisor DKC,
or a subordinate DKC that exists on the same storage system
as the supervisor DKC.
ArbCdev
When the YKMAKE
command is executed
1
Specify S to register a storage system as the supervisor DKC.
You can only specify this for one storage system in a
secondary site.
SSecondary
N/ASecondary storage system serial numberS/N
If multiple storage systems exist for one C/T ID and sub C/T
ID combination, * is displayed to the right of the serial
number.
When the YKMAKE
command is executed.
1
Specify the arbitration command device of the secondary
site.
You do not have to specify this item for the supervisor DKC,
or a subordinate DKC that exists on the same storage system
as the supervisor DKC.
ArbCdev
1
Unless all volumes are SIMPLEX, execution might not be executed properly.
2
Even if you disable EXCTG in the definition, it is not actually disabled on the DKC until the YKMAKE command is
re-executed.
Before changing the definition, execute the YKDELETE command to dissolve the copy group.
If you press the F5=Add key in the Copy Group Detail Definition panel, the Copy Group Pair Detail
panel (in which the copy pair is not defined) is displayed, and then the Setting C/T ID Attributes
panel appears . In this panel, you can define a consistency group ID.
Discover/Define Configuration Panel (Configuration File Definition) 75