HP P9000 Business Continuity Manager Reference Guide (T5253-96058, September 2011)

Table 151 Device Information Structure (continued)
DescriptionREXX variables
Time remaining until timeout (minutes)Trem
Number of copy pairs made by full copyPendingCt
Number of Duplex copy pairs in the C/T group
to which the specified device belongs
DuplexCt
Number of Resync copy pairs in the C/T group
to which the specified device belongs
ResyncCt
Existence of CAJ ATTIME suspend information
(Valid)
Info
1
AT_CAJ
Restore journal group IDR_JNL
Generation ID (hexadecimal number: 00-FF)GenID
Suspend mode used by the CAJ ATTIME suspend
function.
SplitMode
(This indicates whether secondary volumes
transitioning to the suspend status can be
accessed or updated.)
• STEADY: Volumes can be accessed or
updated after the copy operation is completed.
• QUICK: Volumes can be accessed or updated
even while the copy operation is in progress.
ATTIME suspend statusStatus
• Notset: The ATTIME suspend time is not set.
• PRESET: The ATTIME suspend time is set, but
suspend has not been performed.
• SUSPEND (TIMESTAMP): Suspend was
performed because the ATTIME suspend time
elapsed.
• SUSPEND (TIMEOUT): Suspend was
performed because a timeout occurred.
• SUSPEND (NOIO): Suspend was performed
because no update journal was detected.
BC copy group statusBCStatus
• WAITING: Suspend processing has not been
started.
• SUSPENDING: Suspend processing is ongoing.
• SUSPEND: Suspend processing ended
normally.
• ERROR: Suspend processing ended
abnormally.
The status of the CAJ copy group when the BC
copy group is suspended.
CAJStatus
• DUPLEX: When suspend was performed, all
CAJ copy pairs were in DUPLEX status.
• UNEXPECTED: When a suspend was
performed, some CAJ copy pairs were not in
DUPLEX status.
Error code (hexadecimal number: 0000-FFFF)ErrorCode
336 Data Objects