HP P9000 Business Continuity Manager Reference Guide (T5253-96058, September 2011)

/* perform fail-over operations in a 2DC configuration with */
/* HyperSwap and UR. */
/* This script can be used when storage system at the primary */
/* site has been stopped for a storage system maintenance or */
/* because a storage system failure has occurred. */
/* */
/* This sample script assumes the following settings: */
/* */
/* 1) The definition files are stored in the dataset with the */
/* prefix "BCM.DEMO". */
/* 2) The TC copy group's copy group ID is MYTCHS. */
/* 3) The copy group ID between the primary and */
/* remote sites is MYUR1. */
/* 4) The copy group ID between the local and */
/* remote sites is MYUR2. */
/* 5) The route list ID is "DEMORLST". */
/* 6) The primary Device Address Domain ID is "PRIM". */
/* */
/* The details for this sample script are as follows: */
/* */
/* 1) Call YKLOAD to load configuration definitions. */
/* 2) Confirm the ready state for operations in 2DC configuration */
/* with HyperSwap and UR. */
/* 3) Watch for the occurrence of a HyperSwap. */
/* 4) Suspend MYUR1. */
/* 5) Execute DeltaResync MYUR2. */
/* */
/**********************************************************************/
/* Sample script begins. */
say "#-- BEGIN YKDEMO08."
address TSO "YKENV"
call "YKLOAD" "STEM(DEMO_INFO.MYTCHS.) PREFIX(BCM.DEMO) GROUP(MYTCHS)",
"DAD(PRIM) MSG(DEMO_MSG.) ROUTE(DEMORLST)"
/*
* Check the return code of YKLOAD.
*/
if result /= 0
then do
call printErrorMessage
exit
end
else
nop
call "YKLOAD" "STEM(DEMO_INFO.MYUR1.) PREFIX(BCM.DEMO) GROUP(MYUR1)",
"DAD(PRIM) MSG(DEMO_MSG.)"
/*
* Check the return code of YKLOAD.
*/
if result /= 0
then do
call printErrorMessage
exit
end
else
nop
call "YKLOAD" "STEM(DEMO_INFO.MYUR2.) PREFIX(BCM.DEMO) GROUP(MYUR2)",
"DAD(PRIM) MSG(DEMO_MSG.)"
284 CLI Commands