HP P9000 Business Continuity Manager Reference Guide (T5253-96058, September 2011)

Table 10 Contents of the Set Defaults Panel (continued)
DescriptionItem
Specify options for the YKWATCH command and for the job that outputs the SMS
list.
SEND Options
Timeout Hours
Timeout Minutes
Job Name Prefix
Specify the JCL of the background job.JCL JOB Statement
The specified value is used at the following times:
• When w is entered in AC on the Manage Copy Groups panel and the
YKWATCH command is executing in the background
• When using the Scan Copy Pair Inside Storage System panel to execute in
the background the copy group definition generation function for a PPRC
copy pair
1
If one or more configuration files have already been created by using the Mainframe Agent YKP2A command, specify
a different prefix from that of any configuration file. To do this, use the command for Configuration File Prefix. If you
specify the same prefix, an error occurs in the Scan Copy Pair Inside Disk Array panel or Manage Copy Groups panel.
2
If you have already started the Business Continuity Manager agent with LOCK(PREFIX) specified, specify a prefix that
is different from the one Business Continuity Manager agent uses for Configuration File Prefix. If you specify the same
name, an error will occur.
3
For these values, see “Executing YKLOAD” (page 109).
Press F8=Forward to display the remaining items in the panel. The Set Defaults panel is displayed
as when F8=Forward is pressed.
Figure 16 Set Defaults Panel
28 ISPF Panels