HP P9000 Business Continuity Manager Reference Guide (T5253-96058, September 2011)

• The setting for use of the Remote DKC Control Function or the route list ID
• The parameters for the YKWATCH command, which monitors volume status, and the JCL for
background jobs
The Set Defaults panel is shown in Figure 15 (page 27) (values in the figure are samples only).
Figure 15 Set Defaults Panel
Table 10 (page 27) describes the items in the Set Defaults panel.
Table 10 Contents of the Set Defaults Panel
DescriptionItem
Specify the prefix of the configuration file name in alphanumeric characters
(required).
Configuration File Prefix
1, 2
Do not use hyphens.
Specify the DAD ID of the local site in alphanumeric characters. (required)Local Device Address Domain ID
Do not use hyphens.
Specify the device address domain ID of the host on which Business Continuity
Manager is running (the host DAD ID) by using alphanumeric characters
(required).
ISPF Log Max
Hyphens cannot be specified.
Use the following values to set the Remote DKC Control Function:Remote DKC Function
3
• Y—Default to the Remote DKC Control Function.
• N—Do not default to the Remote DKC Control Function.
Specify ROUTE parameter value (the route list ID) for the YKLOAD command. Do
not use hyphens.
Preset RouteListID
3
If Remote DKC Function is set to Y and Preset RouteListID is not specified, and
YKLOAD is executed in the Manage Copy Groups panel, then the LOAD Option
panel to query the route list ID is shown.
Set Defaults Panel (Prefix and DAD ID Settings) 27