HP P9000 Business Continuity Manager Reference Guide (T5253-96058, September 2011)

Table 125 YKQRYDEV Command Return Code List (continued)
MeaningReturn Code
Terminating due to processing errors.44
Terminating due to invalid parameters.48
The command terminated abnormally. The user does not have permission to execute
this command.
128
YKQRYPTH Command
Applies to PTH.
Format
YKQRYPTH
1
STEM(stem-name-1)
1
MSG(stem-name-2)
[
1
PSN(storage system-serial-number)[
1
PCU(cu-number)]
[
1
SSN(storage system-serial-number)[
1
SCU(cu-number)]
[
1
{FORWARD|REVERSE}]
[
1
RESTRUCT]
[
1
TYPE({CU|DKC})]
Function
This command is a TSO/E command called from REXX scripts.
This command acquires the status of all physical paths allocated to all or some of the logical paths
identified in the path set that is stored in the path set structure with the prefix specified by the STEM
parameter.
Parameters
STEM(stem-name-1) ~ <REXX prefix of 64 or fewer characters>
Specify the prefix of the name of the path set structure that stores information about the logical
path whose status you want to obtain. Specify the same character string as the one specified in
the STEM parameter of the YKLOAD command that loaded the corresponding logical path. You
must also include a trailing period character.
MSG(stem-name-2) ~ <REXX prefix of 64 or fewer characters>
Specify an optional prefix for the name of the message structure used to store the messages to be
generated by this command. You must also include a trailing period character.
The message structure is initialized when the CLI command with the same name as the MSG
parameter is specified.
PSN(storage system-serial-number) ~ <from 5 to 12 alphanumeric characters>
If this parameter is specified, for each logical path within the path set stored in the path set structure
specified for the STEM parameter, inter-CU logical paths will be acquired in all cases where the
paths treat CUs within storage systems (that have the serial number specified by this parameter)
as MCUs, and inter-DKC logical paths will be acquired in all cases where the paths treat the storage
system (that has the serial number specified by this parameter) as the primary storage system.
If neither this parameter nor any other parameters are specified, the command obtains the status
of all logical paths.
Command details 229