HP P9000 Business Continuity Manager Reference Guide (T5253-96058, September 2011)

Table 120 YKINSCHK Command Output Items (continued)
ExplanationOutput item
Outputs the SVC number of the user SVC that was defined as an IEASYMxx parmlib
member and registered statically. If no SVC number can be acquired, N/A is output.
Static installed
user SVC:
SVC Number
Outputs the version of the user SVC that was defined as an IEASVCxx parmlib member
and registered statically. If no version information can be acquired, N/A is output.
Static installed
user SVC:
Version
Outputs an explanation about the relationship between a dynamically or statically
registered user SVC and the user SVC that will be enabled.
Directions
Output example
The following is an output example of the YKINSCHK command:
READY
YKINSCHK
Security Setting ..........: OK
User SVC Routine ..........: OK
Facility Class Profiles Query : STGADMIN.YKA.BCM.YKQUERY
Facility Class Profiles Commands : STGADMIN.YKA.BCM.COMMANDS
Directions
The current setup is listed above.
An unregistered profile is listed as N/A.
The RACF settings are necessary in order to use CLI commands.
After a profile is defined in the RACF FACILITY class, a user can use
CLI commands by being given the access rights of the profile.
There are the following two kinds of profiles:
- Facility Class Profiles Query
- Facility Class Profiles Commands
To give a user the permissions necessary to use all of the BCM commands:
1. Make the RACF FACILITY class active.
2. Define the STGADMIN.YKA.BCM.COMMANDS profile in the FACILITY class.
3. Give the user the access rights of the profile.
To give a user the permissions necessary to use some of the BCM commands
(the reference commands):
4. Make the RACF FACILITY class active.
5. Define the STGADMIN.YKA.BCM.YKQUERY profile in the FACILITY class.
6. Give the user the access rights of the profile.
Version of User SVC for this program .............: v.r.m-nn(zz)
Current User SVC : SVC Number 200 Version v.r.m-nn(zz)
Dynamic registered User SVC : SVC Number 200 Version v.r.m-nn(zz)
Static installed User SVC : SVC Number 251 Version v.r.m-nn(zz)
Directions
The current users SVC routine registration number and version are listed
above.
User SVC numbers and versions that have not been acquired are listed as
N/A.
If a Dynamic registered User SVC exists, the Dynamic registered User SVC
will become the Current User SVC.
If a Dynamic registered User SVC does not exist and a Static installed
User SVC exists, the Static installed User SVC will become the Current
User SVC.
If the Current User SVC is smaller than the Version of User SVC for this
program, then the program will not run properly.
Command details 219