Hitachi Dynamic Link Manager Software Users Guide for AIX (7.x) (HIT5208-96027, August 2012)

Message ID Message Text Explanation
after another, or specify
the modified odmsetfile
in dlmmigsts
again, and
then re-execute. For
details about the
dlmmigsts utility, see
dlmmigsts Utility for
Assisting HDLM Migration
on page 7-18. For details
on the dlmodmset utility,
see dlmodmset Utility for
Setting the HDLM
Execution Environment
ODM on page 7-20.
If parameter = -set,
execute dlnkmgr set
one
after another, or specify
the modified dlnksetfile
in dlmmigsts again, and
then re-execute.
KAPL13016-
E
The backup operation cannot be
performed because DLManager.rte is not
installed.
Action
Execute the dlmmigsts
utility in an environment
where DLManager.rte is
installed.
KAPL13017-
E
The restoration operation cannot be
performed because DLManager.mpio.rte
is not installed.
Action
Install
DLManager.mpio.rte, and
then execute the
dlmmigsts
utility again.
KAPL13018-
E
The backup operation cannot be
performed because there is no /usr/
DynamicLinkManager/config/dlmmgr.xml
file. Execute the DLMgetras utility to
collect error information, and then
contact your vendor or maintenance
company. Refer to the HDLM User's
Guide for instructions how to execute the
DLMgetras utility.
Action
Contact your HDLM vendor
or the maintenance
company if there is a
maintenance contract for
HDLM.
KAPL13019-
E
The same file name was specified for
odmsetfile and dlnksetfile. Filename =
aa...aa, bb...bb
Details
aa...aa: odmsetfile
Filename
bb...bb: dlnksetfile
Filename
Action
Check file name, and then
try again.
KAPL13020-
E
The file odmsetfile was not restored. Action
Check file name, and then
try again.
Messages
8-109
Hitachi Dynamic Link Manager User Guide for AIX®