Hitachi Dynamic Link Manager Software Users Guide for AIX (7.x) (HIT5208-96027, August 2012)

KAPL10001 to KAPL11000
Message
ID
Message Text Explanation
KAPL10001-
W
No parameter has been specified. Details
No directory to which the
collected information will
be output has been
specified.
Action
Check the parameters of
the DLMgetras utility for
collecting HDLM error
information, and then
retry. For details on the
DLMgetras
utility, see
DLMgetras Utility for
Collecting HDLM Error
Information on page 7-4.
KAPL10002-
W
Too many parameters have been
specified.
Details
Four or more parameters
have been specified.
Action
Check the parameters of
the DLMgetras utility for
collecting HDLM error
information, and then
retry. For details on the
DLMgetras
utility, see
DLMgetras Utility for
Collecting HDLM Error
Information on page 7-4.
KAPL10003-
W
The first parameter has not been set to a
directory. Value = aa...aa
Details
The first parameter must
be set to a directory to
which collected information
is output.
aa...aa: First parameter
Action
Check the parameters of
the DLMgetras
utility for
collecting HDLM error
information, and then
retry. For details on the
DLMgetras utility, see
DLMgetras Utility for
Collecting HDLM Error
Information on page 7-4.
KAPL10004-
W
The parameter contains an incorrect
value. Value = aa...aa
Details
The first parameter must
be a directory. The second
parameter must be -f.
Messages
8-77
Hitachi Dynamic Link Manager User Guide for AIX®