Hitachi Dynamic Link Manager Software Users Guide for AIX (7.x) (HIT5208-96027, August 2012)
Message
ID
Message Text Explanation
to recover the settings. For
details on the view
operation, see
view
(Displays Information) on
page 6-32. For details on
the set operation, see set
(Sets Up the Operating
Environment) on page
6-16.
KAPL04054-
I
The owner controller will now be revised.
(number of LUs = aa...aa)
Details
aa...aa: number of
targeted LUs
Action
None.
KAPL04055-
I
The owner controller was revised.
(number of changed LUs = aa...aa)
Details
aa...aa: number of
changed LUs
Action
None.
KAPL04056-
W
The owner controller cannot be revised
because no paths are in the Online status.
(LU = aa...aa)
Details
aa...aa: ID (serial number
+ iLUN) of the LU that was
not revised
Action
Recover the paths from the
failure, and then place
them in the Online status,
or exclude the LU from
dynamic I/O path control.
KAPL05001 to KAPL06000
Message ID Message Text Explanation
KAPL05003-I The HDLM driver (filter component) was
successfully attached to Disk (aa...aa),
Partition (bb...bb).
Details
The path corresponding to
Disk (aa...aa: Disk
sequence number) and
Partition
(bb...bb: Fixed
at 0) was successfully
registered in the core
logic.
Action
None.
KAPL05008-
E
Could not allocate memory. (aa:bb)
Execute the DLMgetras utility to collect
Details
8-40
Messages
Hitachi Dynamic Link Manager User Guide for AIX®