Manualshelf

Hitachi Dynamic Link Manager Software Users Guide for AIX (7.x) (HIT5208-96027, August 2012)

ManualsBrandsHP ManualsStorageHP XP P9500 Disk Array
111112113114115116117118119120
# umount /cdrom
26. Delete any mount directory you may have created in step 11.
# rm -r /cdrom
Installing HDLM in a PowerHA 5.5 or PowerHA 6.1 Environment
This subsection explains how to install HDLM when you are running services
in a PowerHA 5.5 or PowerHA 6.1 environment.
Upgrading or Re-installing HDLM in a PowerHA 5.5 or PowerHA 6.1 Environment
(in a Local Boot Disk Environment)
Because HDLM version 5.8.1 or earlier cannot be upgraded to HDLM version
5.9 or later, migration is necessary. For details about migration, see
Migrating HDLM in a PowerHA 5.5 or PowerHA 6.1 Environment on page
3-58.
For details about setting up PowerHA, see the PowerHA documentation.
To upgrade or re-install HDLM in an environment that uses PowerHA
and a local boot disk:
1. Log in to AIX as the root user.
If you are using a virtual I/O server, see the virtual I/O server
documentation to log in to AIX.
2. Stop PowerHA on the standby host.
3. Upgrade or re-install HDLM on the standby host.
To do so, perform steps 2 through 23 in When Installing HDLM in a Local
Boot Disk Environment on page 3-36
of
Performing an Upgrade
Installation or Re-installation of HDLM on page 3-36 on the standby host.
4. Start PowerHA on the standby host.
5. Stop PowerHA on the active host.
Specify takeover as the shutdown mode.
6. Upgrade or re-install HDLM on the active host.
To do so, perform steps 2 through 23 in When Installing HDLM in a Local
Boot Disk Environment on page 3-36
of
Performing an Upgrade
Installation or Re-installation of HDLM on page 3-36 on the active host.
7. Start PowerHA on the active host.
Upgrading or Re-installing HDLM in a PowerHA 5.5 or PowerHA 6.1 Environment
(in a Boot Disk Environment)
For details about setting up PowerHA, see the PowerHA documentation.
To upgrade or re-install HDLM in an environment that uses PowerHA
and a boot disk:
1. Log in to AIX as the root user.
Creating an HDLM Environment
3-57
Hitachi Dynamic Link Manager User Guide for AIX®