P9000Watch and P9000Sketch Reference guide for HP StorageWorks P9000 Performance Advisor v5.4 (T1789-96332, April 2012)

4. Enter e or press Ctrl+C to quit P9000Watch.
Host Group Metrics
1. Enter the host groups for which you want to view performance metrics.
2. Enter the c command. A list of all the available ports appear.
3. Select the required port.
4. Enter the c command. The Pick LDEVs/RAID Groups Selection Scheme appears.
• Filtering LDEVs by RAID Groups
Follow this procedure to filter LDEVs by RAID groups:
a. Enter 1 to select this option. The RAID groups within the host groups are displayed.
b. Select the required RAID groups.
c. Enter the c command. The LDEVs within the RAID groups are displayed.
d. Select the required LDEVs.
e. Enter the c command. The following message appears:
Would you like to archive the performance data collected? (Y/N)
f. Enter Y to save the performance data in .CSV format. The Output screen appears.
NOTE:
The Output screen displays performance data of all selected host groups, ports, LDEVs,
RAID groups, DKCs and processors belonging to the selected array.
g. Enter e or press Ctrl+C to quit P9000Watch.
• Filtering RAID Groups by LDEVs
Follow this procedure to filter RAID groups by LDEVs:
a. Enter 2 to select this option. The LDEVs within the host groups are displayed.
b. Select the required LDEVs.
c. Enter the c command. The RAID groups within the LDEVs are displayed.
d. Select the required RAID groups.
e. Enter the c command. The following message appears:
Would you like to archive the performance data collected? (Y/N)
f. Enter Y to save the performance data in .CSV format. The Output screen appears.
NOTE:
The Output screen displays performance data of all selected host groups, ports, LDEVs,
RAID groups, DKCs, and processors belonging to the selected XP or P9000 disk arrays.
g. Enter e or press Ctrl+C to quit P9000Watch.
• Manually Adding RAID Groups and LDEVs without filtering
Follow this procedure to manually add RAID groups and LDEVs without filtering:
a. Enter 3 to select this option. The RAID groups are displayed.
b. Select the required RAID groups.
c. Enter the c command. The LDEVs are displayed.
Viewing performance metrics in P9000Watch46