P9000Watch and P9000Sketch Reference guide for HP StorageWorks P9000 Performance Advisor v5.4 (T1789-96332, April 2012)

Selecting Host Groups
Select the host whose performance data you want to monitor.
To select a host group, enter the number corresponding to it. For example, to select HWP10 and
Kalam host groups (see figure Available Host Groups), perform the following steps:
1. Enter 111 and press the Enter key.
The HWP10 host group is selected as shown in the following figure.
NOTE:
The selected host group is highlighted in green.
Figure 9 shows one host group selected from the list of available host groups.
Figure 9 Available Host Groups: One Host Group selected
.
2. Enter 118 and press the Enter key.
The Kalam host group is selected.
Figure 10 shows two host groups selected from the list of available host groups.
P9000Watch and P9000Sketch Reference Guide 31