P9000Watch and P9000Sketch Reference guide for HP StorageWorks P9000 Performance Advisor v5.4 (T1789-96332, April 2012)

Viewing Sync/Async metrics
To view the Sync/Async metrics for P-VOLs and S-VOLs:
1. Start P9000Watch. The Array menu appears.
2. Select the array whose performance you want to monitor, and then press the Enter key. The fol-
lowing list of host group options connected to the array is displayed:
• 1 Sync/Async Metrics
• 2 CA Journal Metrics
• 3 Host Group Metrics
3. Select 1, and then press the Enter key. The list of LDEVs configured as P-VOLs and S-VOLs in the
selected XP or P9000 disk array is displayed.
4. To select a P-VOL or S-VOL, enter the number corresponding to it, and then press the Enter key.
The selected P-VOL or S-VOL record is highlighted in green. You can select multiple P-VOLs and
S-VOLs.
5. Enter c to proceed and view the performance metrics.
To understand the performance metrics for P-VOLs and S-VOLs, see Sync/Async Metrics.
Clearing P-VOL or S-VOL selection
To clear a P-VOL or S-VOL record selection, enter its corresponding number, and then press the Enter
key.
CA Journal Metrics
The CA Journal metrics screen lists all the configured P-VOLs and S-VOLs in the selected XP or P9000
disk array based on the CTGs to which they belong.
Figure 7 CA Journal Metrics
.
P9000Watch and P9000Sketch Reference Guide 27