P9000Watch and P9000Sketch Reference guide for HP StorageWorks P9000 Performance Advisor v5.2 (T1789-96319, May 2011)

Port menu
The Port menu lists all the ports that are connected to the selected host groups. This menu is used to
select the port whose performance needs to be monitored or captured.
Figure 15 shows the Port menu.
Figure 15 Port menu
.
Table 9 describes the fields that appear in the Port menu.
Table 9 Port menu — screen fields
DescriptionScreen field
Selection numberNum
Port numberPort
Slot numberSlot
Type of port (SCSI, Fibre, ESCON, iSCSI, ENAS, FCoE)Type
Connection type (N for point-point, NL for FC-AL)Topo
Fabric login (Y/N)FLOGI
Operating mode of the port (Target, MCU Initiator, RCU Target, e-LUN
initiator)
Mode
Security switch (On/Off)Secu
Storage Logical Partition (SLPR) number.
NOTE:
Slpr does not exist in the P9000 disk arrays. So, the Slpr field
displays 0 for the P9000 disk array in the output screen of the Port
menu.
Slpr
P9000Watch and P9000Sketch Reference Guide 33