P9000Watch and P9000Sketch Reference guide for HP StorageWorks P9000 Performance Advisor v5.2 (T1789-96319, May 2011)

Table 8 lists the fields in the Host Groups.
Table 8 Host Groups — fields
DescriptionScreen field
Selection numberNum
User-friendly names given to the hosts.Nickname
Displays the host group name.Host Group Name
The port used by the XP or P9000 disk array to com-
municate with the host.
Ports
Viewing Host Groups
To view the host groups connected to an array, perform the following steps:
1. Start P9000Watch. The Array menu appears.
2. Select the array whose performance you want to monitor and press the Enter key. The list of host
groups connected to the array appears.
Selecting Host Groups
Select the host whose performance data you want to monitor.
To select a host group, enter the number corresponding to it. For example, to select TEST and Vmware
host groups (see figure Available Host Groups), perform the following steps:
1. Enter 33 and press the Enter key.
The TEST host group is selected as shown in the following figure.
NOTE:
The selected host group is highlighted in green.
Figure 8 shows one host group selected from the list of available host groups.
Working with P9000Watch menus and commands26