P9000Watch and P9000Sketch Reference guide for HP StorageWorks P9000 Performance Advisor v5.2 (T1789-96319, May 2011)

• Configuration changes that are reflected with every fresh run
• Small footprint and easy to execute, does not require any special installation
For more information on installing the P9000 Performance Advisor, see the HP StorageWorks P9000
Performance Advisor Installation Guide.
P9000Watch environment
This section describes the software and hardware environment required to run P9000Watch.
Software environment
Table 1 lists the P9000Watch software environment.
Table 1 P9000Watch software environment
• Windows Server 2003 Standard, Enterprise Edition
(IA-32 only) (Service Pack 1, Service Pack 2)
• Windows Server 2003 Standard, Enterprise Edition
R2 (IA-32 only) (Service Pack 1, Service Pack 2)
• Windows Server 2008 Enterprise Edition R2 (x-64
only)
• Windows x86, x86_64
• Windows 64-bit (IA-64 only)
• HP-UX
• HP-UX 11.11 32-bit
• HP-UX 11.23 PA RISC
• HP-UX 11.23 IA 64 bit
• HP-UX 11.31 PI PA RISC
• HP-UX 11.31 PI IA 64 bit
• AIX 5.3 and later
• Solaris (SPARC)
• Solaris x86
• Red Hat Enterprise Linux (x32 and x64)
• SuSE Linux Enterprise Server (x32 and x64)
• VMware
Operating system
Latest version of P9000 Performance Advisor host
agent.
Host agent
Hardware environment
Table 2 lists the P9000Watch hardware environment.
Table 2 XP9000Watch hardware environment
P9500 disk array and the XP24000, XP20000,
XP12000, XP10000, SVS200, XP1024, XP128 disk
arrays
Array types
Introduction to P9000Watch10