P9000Info v21.00.00 Release Notes (T1789-96320, May 2011)

NOTE:

Multipathing is enabled.

Firmware requirements

Table 1 lists the minimum firmware requirements.

Table 1 Firmware requirements

Minimum RequirementXP/ P9000 Array

60.01.31.00/00XP24000

60.01.66.00/00XP20000

50.07.69.00/00SVS200

50.09.34.00/00XP12000

50.09.34.00/00XP10000

21.14.30.00/00XP128, XP1024

01.19.99.00/02XP48

70-01-26-00/00 or laterP9500

V1.15.03 or later

P9000/XP RAID Manager Library (RMLIB) (P9000,

XP24000, XP12000, XP10000, and SVS200)

Enhancements

None.

Fixes

P9000Info 21.01.00 includes fixes for the following:

• P9000Info does not work for a P9500 Disk Array that is configured with RAID groups greater

than 18-1.

• P9000Info gives incorrect array serial number, if the serial number of P9500 Disk Array is greater

than 65535.

• On a HP-UX v11.31 host, P9000Info does not support Cluster Device File System (CDSF). So, the

output of P9000Info does not include the mapping of each LUN to the volume group and mount

points.

Notes

If you are using P9000 Performance Advisor Solaris, AIX or HP-UX host agent, view the SLPR and

CLPR information for your XP disk arrays through P9000 Performance Advisor, as P9000Info for these