P9000Info Release Notes Part Number: T1789-96320 First edition: May 2011
Legal and notice information © Copyright 2011 Hewlett-Packard Development Company, L.P.
Version: 21.01.00 Description P9000Info is a command-line utility provided with the HP StorageWorks P9000 Performance Advisor Software and Array Manager Software. It is used to obtain the configuration information of the logical unit numbers (LUNs) exposed to the XP or the P9000 disk arrays. This document describes the P9000Info 21.01.00 enhancements, fixes, limitations, and other additional information. IMPORTANT: P9000Info was called XPInfo in versions earlier to v5.0.
NOTE: Multipathing is enabled. Firmware requirements Table 1 lists the minimum firmware requirements. Table 1 Firmware requirements XP/ P9000 Array Minimum Requirement XP24000 60.01.31.00/00 XP20000 60.01.66.00/00 SVS200 50.07.69.00/00 XP12000 50.09.34.00/00 XP10000 50.09.34.00/00 XP128, XP1024 21.14.30.00/00 XP48 01.19.99.00/02 P9500 70-01-26-00/00 or later P9000/XP RAID Manager Library (RMLIB) (P9000, XP24000, XP12000, XP10000, and SVS200) V1.15.03 or later Enhancements None.
host agents displays random CLPR and SLPR values (example of random values are 256, 122, or zero). To view the SLPR and CLPR values through P9000 Performance Advisor: 1. On the P9000 Performance Advisor Home page, click Array View in the left pane. 2. Click the + sign for Arrays. 3. From the list of XP and P9000 disk arrays that are monitored by P9000 Perf Advisor, click the + sign for the XP and the P9000 disk array, for which you want to view the related SLPR and CLPR data. 4.
