OpenVMS Support For HP P9000 Performance Advisor Whitepaper
Table Of Contents
- Introduction
- Intended Audience
- Verifying host connectivity to a command device
- Prerequisite
- Executing the OpenVMS Integrity Server host agent installer
- Confirming the P9000 Performance Advisor OpenVMS Integrity Server host agent services
- Verifying if the host agents appear in P9000 Performance Advisor
- Enable autostart for P9000PA services after every reboot of system
- Manual restart for P9000PA services
- Manual stop of P9000PA Services
- Glossary
- For more information

Enable autostart for P9000PA services after every reboot of
system
Perform the steps listed to restart P9000PA services on every reboot of System:
1. Ensure that the TCP/IP services are active on the OpenVMS Integrity Server (IA-64) host.
2. Enter the following command in the sys$manager:systartup_vms.com file.
@[SYS$STARTUP]xppa.com
3. Save changes and close the file.
Manual restart for P9000PA services
Execute below command as follow to restart the P9000PA services:-
@[SYS$STARTUP]xppa.com
Manual stop of P9000PA Services
To stop the OpenVMS Integrity Server host agent and real-time services:
At the system prompt, enter the following:
@SYS$COMMON:[HEWLETTPACKARD.P9000HOSTSW.HOSTAGENT.SBIN]stopXPPA.com
At the system prompt, enter the following:
@SYS$COMMON:[HEWLETTPACKARD.P9000HOSTSW.realtime]stoprealtime.com