HP XP P9000Info Release Notes HP Part Number: T1789-96350 Published: October 2013 Edition: 3
© Copyright 2013 Hewlett-Packard Development Company, L.P.
Contents 1 HP XP P9000Info Release Notes...................................................................4 Description..............................................................................................................................4 Supported platforms..................................................................................................................4 Firmware requirements............................................................................................................
1 HP XP P9000Info Release Notes Version: 25.00.00 Description HP XP P9000Info is a command-line utility provided with the HP XP P9000 Performance Advisor Software and Array Manager Software. It is used to obtain the configuration information of the logical unit numbers (LUNs) exposed to the XP or the P9000 disk arrays. This document describes the HP XP P9000Info 25.00.00 enhancements, fixes, limitations, and other additional information. IMPORTANT: HP XP P9000Info was called XPInfo in v19.01.
• ESXi 5.0 • ESXi 5.1 NOTE: Multipathing is enabled. Firmware requirements Table 1 (page 5) lists the minimum firmware requirements. Table 1 Firmware requirements XP and P9000 disk arrays Minimum firmware version XP24000 60-04-13-00/00 or later (recommended: 60-08-37-00/00) XP20000 60-02-48-00/12 or later (recommended: 60-08-37-00/00) SVS200 50.07.69.00/00 or later XP10000/XP12000 50.09.34.00/00 or later XP1024/XP128 21.14.30.
• HP XP P9000Info supports UDEV on Linux platform. NOTE: The location of UDEV devices location must be specified in the /dev directory. The names for UDEV devices must begin with an sd. • HP XP P9000Info can now recognize RAID 6 (14D+2P) disk mechanism configured on the array. • HP XP P9000Info also supports the following operating systems: ◦ IBM AIX 7.
The corresponding SLPR and CLPR data for the cu:ldev ID is displayed under the respective column headings (SLPR and CLPR) in the LDEV table. NOTE: • The SLPR value is displayed as "--" for P9000 and later disk arrays. When an LDEV is visible from more than one array port, HP XP P9000Info randomly displays an array port for each execution of HP XP P9000Info.
