HP XP P9000 Performance Advisor v6.0 Software Troubleshooting and FAQs Guide

Table 8 Configuring the e-mail (SMTP) courier on the web server for alarms (continued)
The following entry specifies who the e-mail is said to be
coming from:
SMTP_Mail_From=alarm_server@your_company.com
The following are the fixed and user-defined messages for
the alarm descriptions.
CHIP_PCB_MP_Util_Fixed=Client/Host Interface Processor
Utilization CHIP_PCB_MP_Util_User=Front (Host) End
Processor Utilization LDEV_Sequential_Reads_Fixed=Logical
Device Sequential Reads
LDEV_Sequential_Reads_User=Drive partition Sequential
Reads LDEV_Sequential_Writes_Fixed=Logical Device
Sequential Writes LDEV_Sequential_Writes_User=Drive
partition Sequential Writes
LDEV_Random_Reads_Fixed=Logical Device Random Reads
LDEV_Random_Reads_User=Drive partition Random Reads
LDEV_Random_Writes_Fixed=Logical Device Random
Writes LDEV_Random_Writes_User=Drive partition Random
Writes LDEV_Sequential_I_O_rates_Fixed=Logical Device
Sequential Input/Output
LDEV_Sequential_I_O_rates_User=Drive partition Sequential
I/O LDEV_Random_I_O_rates_Fixed=Logical Device
Random Input/Output LDEV_Random_I_O_rates_User=Drive
partition Random I/O ACP_PAIR_Utilization_Fixed=Array
Control Processor Utilization
ACP_PAIR_Utilization_User=Back (Disk) End Processor
Utilization
Table 9 Configuring SMTP_Rpt_Compress for reports
On Windows platforms:
C:\Program Files\Hewlett-Packard\xppa\
hostagent\config\paxp_service.properties
File
If installed in a different location, the path is as follows:
<Installation drive>:\xppa\hostagent\
config\paxp_service.properties.
On UNIX platforms:
/opt/xppa/hostagent/config/
paxp_service.properties
Common for both Windows and UNIX platforms:
C:\Program Files\Hewlett- Packard\xppa\
hostagent\config\xpmgmtstati onaddress.prp.
By default, this parameter is set to TRUE. Any PDF or RTF
file type that you generate for a report is attached as a
Discussion
compressed file in the email notification sent by HP XP
P9000 Performance Advisor. To receive a normal
(uncompressed) report as an email attachment, set the
SMTP_Rpt_Compress to FALSE. Then, restart the HP XP
P9000 Performance Advisor Tomcat service on your
management station. Any PDF or RTF file type that you
generate for a report is provided as a normal file
attachment in the email notification sent by HP XP P9000
Performance Advisor.
Table 10 Configuring the e-mail (SMTP) courier on the web server for reports
...%HPSS_HOME%\pa\properties\serverparameters.propertiesFile
Each time a report is produced that has at least one e-mail
recipient.
When Read
78 Frequently Asked Questions