HP XP P9000 Performance Advisor Software v5.5.1 Release Notes (T1789-96349)

• An error log is displayed on the console of the AIX host agent in the following conditions:
HP XP P9000Watch is active on Advanced Interactive eXecutive (AIX) v6.1.◦
◦ Multi-pathing (MPIO) is enabled on the AIX host agent.
◦ Parameters, dyntrk is set to yes and fc_error is set to fast_fail.
The error log is also displayed when you run the errpt –a command from the Kernel of the
AIX operating system. The following is an excerpt from the error log:
LABEL: FSCSI_ERR10IDENTIFIER: 1FB4FD21Date/Time: Mon Aug 10 15:03:51 CDT
2009Sequence Number: 269527
You can ignore the error log, as it does not impact the HP XP P9000Watch activities or the
output it provides.
Current Status: Fix is being investigated, no ETA as of P9000 Performance Advisor v5.5.1
release date.
• HP XP P9000Watch does not support apostrophe (') in the host group name.
Current Status: Fix is being investigated, no ETA as of P9000 Performance Advisor v5.5.1
release date.
• HP XP P9000Sketch does not support the .csv files that are generated using HP XP
P9000Watch in the CLI mode.
Current Status: Fix is being investigated, no ETA as of P9000 Performance Advisor v5.5.1
release date.
• When you uninstall P9000 Performance Advisor on a management station, the contents in
the C:\windows\system32\config\Oracle directory does not get removed. Hence,
re-installation fails.
Workaround: Delete the C:\windows\system32\config\Oracle directory before
re-installing P9000 Performance Advisor on the management station.
Current Status: If you execute Install Assist utility, an error is displayed.
• When you select “All Report type”, HP recommends that you should use one of the following
formats: PDF, HTML, or Docx over the RTF format.
Current Status: Fix is being investigated, no ETA as of P9000 Performance Advisor v5.5.1
release date.
• The HP XP P9000Watch Linux x86_64 binary is meant only for RHEL 6.1 x86_64. For all
other Linux x86_64 distributions, use HP XP P9000Watch Linux binary.
Current Status: Fix is being investigated, no ETA as of P9000 Performance Advisor v5.5.1
release date.
• P9000 Performance Advisor installation is not supported on domain controller in Windows
Vista, Windows Server 2008, Windows Server 2008 R2, and Windows 7 platforms.
Current Status: Fix is being investigated, no ETA as of P9000 Performance Advisor v5.5.1
release date.
• In HP XP P9000Watch, the CA Journal, CA Sync/Async Metrics are not available in CLI
mode.
Current Status: Fix is being investigated, no ETA as of P9000 Performance Advisor v5.5.1
release date.
Notes 9