HP StorageWorks P9000 Performance Advisor Software v5.4 Install Guide (T1789-96330, April 2012)

6. Enter the port number that the host agent must use to communicate with the management station.
7. Press Enter to confirm the details and begin the installation.
The installation wizard installs the P9000 Performance Advisor OVMS host agent in the following
location: SYS$COMMON:[HEWLETTPACKARD.P9000HOSTSW]
Completing the OpenVMS Integrity Server host agent installation
The P9000 Performance Advisor OpenVMS Integrity Server host agent is installed according to the
selected settings. After the installation is complete, the host agent services start.
P9000 Performance Advisor OpenVMS Integrity Server host agent post-installation steps
The following P9000 Performance Advisor OpenVMS Integrity Server host agent services start:
• HP StorageWorks P9000 Performance Advisor Hostagent
• HP StorageWorks P9000 Performance Advisor Realtime Server
To confirm that these services have started, see Confirming the P9000 Performance Advisor OpenVMS
Integrity Server host agent services on page 84.
You can also verify that the host agent log file is created, by typing the following command at the
prompt: set def SYS$COMMON:[HEWLETTPACKARD.P9000HOSTSW.HOSTAGENT.LOG]
The name of the log file is prefixed with the date and time, that is,
yyyy-MM-dd_hh-mm-ss_PerformanceAdvisorXP.log. For example,
2009-09-16_09-22-08_PerformanceAdvisorXP.log
NOTE:
The PerformanceAdvisorXP.log file cannot be opened when the host agent and realtime
services are active on an OpenVMS Integrity Server (IA-64) host. To view the log file, stop the services,
navigate to the hostagent/log/ folder, and then open the PerformanceAdvisorXP.log file.
For more information on stopping the host agent and realtime services, see Appendix B.
After the installation, return to the installation checklist to complete the remaining tasks specified in
the checklist. For more information, see Table 2 on page 16.
Confirming the P9000 Performance Advisor OpenVMS Integrity Server host agent services
To confirm whether the P9000 Performance Advisor OpenVMS Integrity Server host agent services
have started, type the following command at the system prompt:
show queue
The following output must be displayed:
Batch queue REALTIMEBATCH, available, on VMS84::
Entry Jobname Username Status
----- ------- -------- ------
8 STARTREALTIME SYSTEM Executing
Batch queue XPPABATCH, available, on VMS84::
Entry Jobname Username Status
----- ------- -------- ------
7 STARTUPXPPA SYSTEM Executing
Installing the P9000 Performance Advisor host agents84