HP StorageWorks P9000 Performance Advisor Software v5.4 Install Guide (T1789-96330, April 2012)

NOTE:
For more information on the CLUI, P9000Watch, and P9000Sketch, see the respective documents.
For document download location, see Related information.
Confirming the P9000 Performance Advisor services
To confirm whether the P9000 Performance Advisor services have started after installation:
1. Select Start > Run, type services.msc, and press the Enter key.
The Services window appears.
2. If P9000 Performance Advisor is installed, the status of the following services are in the Started
mode.
• HP StorageWorks P9000 Performance Advisor Database
• HP StorageWorks P9000 Performance Advisor Database Listener
• HP StorageWorks P9000 Performance Advisor Security
• HP StorageWorks P9000 Performance Advisor Tomcat
• HP StorageWorks P9000 Performance Advisor Monitor
NOTE:
The HP StorageWorks P9000 Performance Advisor Database Job Scheduler and HP
StorageWorks P9000 Performance Advisor Database VSS Writer Service are shipped with
Oracle, but they are not necessary to use for P9000 Performance Advisor.
3. Close the Services dialog box.
After confirming that the major services have started, configure any pre-launch settings, as applicable
on your management station or the system from where you want to launch P9000 Performance Advisor.
For more information, see Configuring P9000 Performance Advisor related settings and Launching
P9000 Performance Advisor.
Verifying installed JRE version
P9000 Performance Advisor automatically installs the compatible JRE version on your management
station. Navigate to %HPSS_HOME%\jre\bin to determine the supported JRE version. The
%HPSS_HOME% environment variable must already be configured to point to the HPSS folder location
on your management station.
Only 32-bit (X86) JRE version is supported on both the 32-bit (X86) and 64-bit (X64) Windows
platforms.
For the list of supported JRE versions, see HP StorageWorks P9000 Performance Advisor Software
OS Support Matrix. Download this document from the HP Manuals site for P9000 Performance
Advisor, following is the URL:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&
taskId=101&prodClassId=-1&contentType=SupportManual&docIndexId=64180&prodTypeId=18964&
prodSeriesId=64823.
The recommended version is also available on P9000 Performance Advisor installation disk 2.
Installing P9000 Performance Advisor64