HP StorageWorks P9000 Performance Advisor Software v5.4 Install Guide (T1789-96330, April 2012)

P9000 Performance Advisor post-installation steps
NOTE:
This section is also applicable for the upgrade process.
After the installation completes, the following P9000 Performance Advisor services start:
• HP StorageWorks P9000 Performance Advisor Database
• HP StorageWorks P9000 Performance Advisor Database Listener
• HP StorageWorks P9000 Performance Advisor Security
• HP StorageWorks P9000 Performance Advisor Tomcat
• HP StorageWorks P9000 Performance Advisor Monitor
To confirm whether the above-mentioned services have started, see Confirming the P9000 Performance
Advisor services.
IMPORTANT:
The HP StorageWorks P9000 Performance Advisor Monitor service periodically monitors the P9000
Performance Advisor tomcat and database services, and dispatches appropriate email notifications
that provide the status of these services. To receive notifications, configure the SMTP notification
settings in the PAMonitor_mail.properties file available in the <Install_Drive>:\HPSS\
paMonitor\conf folder on your management station. For more information, see the HP
StorageWorks P9000 Performance Advisor Software User Guide .
The installer log details are available in the PA_Install.log file which is located in the path
<system_drive>:\P9000_PA_Install_Log, where <system_drive> is the drive on which the
operating system is installed. For the PA_Install.log to open, Windows Installer v4.0 or later
should be installed on the management station and functioning properly.
To verify that you can access P9000 Performance Advisor, select the Launch HP StorageWorks P9000
Performance Advisor Management Station v5.4 check box. An IE browser window opens to launch
P9000 Performance Advisor from the management station. For more information, see Launching
P9000 Performance Advisor.
Review the procedures mentioned under Configuring P9000 Performance Advisor related settings
before logging in to P9000 Performance Advisor. If any of those procedures are applicable for your
current setup, complete them for accessing P9000 Performance Advisor.
After accessing the P9000 Performance Advisor, do one of the following based on whether you have
performed an installation or upgrade:
• Return to the installation checklist to complete the remaining prerequisites and checklist items for
installing the host agents. For more information, see Installation checklist for P9000 Performance
Advisor.
• Return to the upgrade checklist to complete the remaining prerequisites and checklist items for
upgrading the host agents. For more information, see Upgrade checklist for P9000 Performance
Advisor.
HP StorageWorks P9000 Performance Advisor Software Installation Guide 63