HP StorageWorks P9000 Performance Advisor Software v5.4 Install Guide (T1789-96330, April 2012)

10. Restart vsftpd by entering /sbin/service vsftpd restart. Make sure no other ftp
services are running (for example, tftp).
Creating and assigning command devices to host agents
If you are using RAID Manager (Business Copy and Continuous Access Synchronous), you already
have command devices that the P9000 Performance Advisor host agent can use. If RAID Manager
is not being used, create a command device using the Remote Web Console or the Remote Control
applications. If you are using the Command View Advanced Edition Device Manager, you must launch
the Command View AE Device Manager and then the Remote Web Console.
• Creating a command device for the XP24000/XP20000/XP12000/XP10000 Disk Array.
• Creating a command device for the XP1024/XP128 Disk Array.
• Creating a command device for a P9000 disk array.
NOTE:
• For the XP24000/XP20000/XP12000/XP10000 Disk Array, configure the command devices as
SLPR0 to report the full SLPR data.
• For the XP24000 Disk Array and the P9000 disk arrays, you can also configure the ThP VVols
as command devices.
• The P9000 Performance Advisor Windows and UNIX host agents can coexist with the RAID
Manager.
For further assistance, contact HP Technical Support.
Logging into XP Remote Web Console through XP Command View AE
Complete the following steps to log onto the XP Remote Web Console:
1. Open an IE browser window and enter http://<ip_address>:23015/DeviceManager/
address in the browser address line to access the XP Command View AE Device Manager.
NOTE:
If you are using a secured connection, the port number is different and the URL format is as
follows:
http://<ip_address>:23016/DeviceManager/
2. In the Login window, enter the user name as system and the password as manager, and click
Login.
3. In the Command View XP AE Device Manager window, click the Resources tab in the CV AE
Device Manager Explorer navigation pane.
4. Click the Subsystems node and select the subsystem for which you want to create the command
device. (The individual subsystems are displayed in the Subsystems navigation pane, which is
on the right side of the Explorer navigation pane.)
5. Click Physical View to launch the Remote Web Console with administrator privileges.
Understanding the P9000 Performance Advisor installation prerequisites36