HP StorageWorks P9000 Performance Advisor Software v5.4 Install Guide (T1789-96330, April 2012)

IMPORTANT:

• If Adobe Flash Player v9.0.115.0 or later is installed on your management station, it blocks

commonly reserved ports as a security measure to prevent unauthorized activities. If a port number

is specified at the end of a URL, it is verified against the list of commonly reserved ports. If the port

number matches any entry in the list, the network request will be rejected and a securityError

event will be logged. So, ensure that the port you select is not listed in the commonly reserved

ports list. For the list of reserved ports, see http://kb2.adobe.com/cps/402/kb402882.html.

• The Tomcat server in the SSL mode (HTTPS) will continue to use the default port 443, and should

not be changed.

• By default, port 80 is reserved on the management station for the P900 Performance advisor and

host agents communication, during the P9000 Performance Advisor upgrade or the host agents

upgrade. You might experience connectivity issues in scenarios where you install P9000 Perform-

ance Advisor and upgrade the host agents, or vice versa, and provide a port number other than

port 80 during the installation. The connectivity issue can arise after the P9000 Performance Advisor

or the host agents upgrade, as port 80 is still expected to be used for the host agents to commu-

nicate with P9000 Performance Advisor. To resolve connectivity issues, see the

HP StorageWorks

P9000 Performance Advisor Software Troubleshooting and FAQs Guide

. For document download

information, see Related information.

For information on the default and non-default ports used by P9000 Performance Advisor, see Table

Table 4 Default and non-default ports

CommentPort NumberTo HostFrom Host

HTTP80PA-MSPA-HA

PA 52 and Above<InstalledPORT>PA-MSPA-HA

RealTime services Not mandate8331PA-MSPA-HA

Oracle Listener Services1521PA-MSPA-HA

Tomcat Shutdown Hook8005PA-MSN/A

SSL – manual443PA-MSPA-HA

JAVA RMI51099Array SVPPA-MS

HTTP80PA-MSBrowser

SSL443PA-MSBrowser

HTTP80PA-MSCLUI-Host

SSL443PA-MSCLUI-Host

For P9000 Performance Advisor to use the port of your choice, release that port's association with

any other application on your management station (if associated).

To know which application is using the port that you want, execute the following command:

C:\>netstat -o -n -a | findstr 0.0:<port #>

Example:

HP StorageWorks P9000 Performance Advisor Software Installation Guide 31