HP StorageWorks P9000 Performance Advisor Software v5.4 Install Guide (T1789-96330, April 2012)

Example 3. VSA added to User_2 profile in the P9000 PA users group:
Vendor_ID=11
SubAttributeType=1
Attribute Value= XPPA: role=user (For P9000 Performance Advisor users:
XPPA: role=user)
For more information on implementing the above-mentioned types of authentication, see “Implementing
the authentication method” on page 51.
Allocating 1 GB free disk space in the TEMP folder
At least 1 GB free disk space in your management station’s TEMP folder is required for a complete
installation of P9000 Performance Advisor. In this context, TEMP folder is the location mentioned in
your user or system environment variable named TEMP.
The following components are also copied during a complete installation:
• Operating platform-specific P9000 Performance Advisor host agents
• Operating platform-specific P9000 Performance Advisor CLUI software
• Tools, P9000Watch, P9000Sketch, and P9000Info
By default, the CLUI software is copied to the management station. If you do not want to copy any
other components in the above mentioned list, select the custom installation method and choose only
those components that you want copy. Each component that you choose displays the approximate
disk space that it requires on the management station. For more information, see Selecting components
to install (custom installation).
Configuring a Loopback Adapter or static IP address
Configure a Loopback Adapter or a static IP address on your management station.
Loopback Adapter
A Loopback Adapter is required if you want to install P9000 Performance Advisor on:
• A DHCP computer
• A non-networked system and plan to connect the computer to a network after installation
NOTE:
The Loopback Adapter installed on the system must be made the primary network adapter.
To verify if a Loopback Adapter is already installed on your computer, run the ipconfig/all
command:
DRIVE_LETTER:\>ipconfig /all
If there is a Loopback Adapter installed, a section that lists the values for the Loopback Adapter is
displayed. For example:
Ethernet adapter Local Area Connec-
tion 2
Connection-specific DNS Suffix
HP StorageWorks P9000 Performance Advisor Software Installation Guide 29