HP StorageWorks P9000 Performance Advisor Software v5.4 Command-line User Interface Reference Guide (T1789-96329, April 2012)

Specify the address of a management station in the format <http://path.to.manage-
mentstation:<port>> or <https://path.to.managementstation>.
–ms <URL>
Specify a user name and password pair in the format user name:password.
–auth <user:pass-
wd>
Can be used in place of –auth.
NOTE:
The password file must be created using the encrypt command only.
–pf <password
file>
Specify the delimiter for the delimited output.–d <char>
Displays data in a readable format.–hr
Prints the usage statement.–?
Examples
raidgrp -dkc 30143 -rg 1-1 –hr
raidgrp -dkc 10055 -rg 1-1 –L
raidgrp -dkc 127 -rg 1-1
raidgrp -dkc 10055 -rg “1-5 1-6”
NOTE:
When using the RAIDGRP command on concatenated RAID Groups, the RAID Groups must be in
double quotes.
EVNTLOG
Syntax
evntlog [-auth <user:passwd>] [-ms <URL>] [-L] [-d<char>] [-hr] [-?]
[-type <type ID>] [-sev <severity>] [-st <mm.dd.yyyy hh:mm:ss>] [-et
<mm.dd.yyyy hh:mm:ss>]
Supported disk array types
XP and P9000 disk arrays
Description
Enables you to view a log or record for all the events generated by P9000 Performance Advisor. This
command also enables you to filter the event records based on the severity and type of events.
Switches
Specify the type of the event.–type <type ID>
CLUI commands42