HP StorageWorks P9000 Performance Advisor Software v5.4 Command-line User Interface Reference Guide (T1789-96329, April 2012)

Specifies a user name and password pair in the format user name:password.
–-auth <user:pass-
wd>
Specifies the start time in the format mm.dd.yyyy hh:mm:ss.—st <start time>
Specifies the end time in the format mm.dd.yyyy hh:mm:ss.–et <end time>
Prints the usage statement.–?
NOTE:
If no start and end time is specified, only the most recent 10 records are retrieved from the management
station.
Examples
dkch -dkc 10055 -hr
dkch -L -dkc 30143
dkch -dkc 10055 —L
LUNH
Syntax
lunh [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>] -ha <host
ID>[-mr <maxRecords>] [-rg <raidGroup>] [-chp <chpPort>] [-acp <acpPair>]
[-dkc <serial #>] [-dver <xxxxxx>] [-?] [-luse] [-ugrp]
Supported disk array types
XP and P9000 disk arrays.
NOTE:
The output for this command may be different for XP and P9000 disk arrays. For more information,
see the sample LUNH report.
Description
Displays logical unit snapshot data, such as LUN ID, device file, emulation, Snapshot ID, CHIP port
ID, and ACP pair ID. The output of this command is sorted by the array ID.
CLUI commands26