HP StorageWorks P9000 Performance Advisor Software v5.4 Command-line User Interface Reference Guide (T1789-96329, April 2012)

Specifies a user name and password pair in the format user name:password.–auth <user:passwd>
Can be used in place of -auth.
NOTE:
The password file must be created using the encrypt script only.
–pf <password file>
Prints the usage statement.–?
Examples
cachegrp -dkc 10851 -clpr 0 -hr
cachegrp -dkc 10851 -perf -hr
cachegrp -dkc 10851 -hr
cachegrp -dkc 10851 -clpr 0 -L
DKCS
Syntax
dkcs [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>] -dkc <serial
#> [-?]
Supported disk array types
XP and P9000 disk arrays.
NOTE:
The output for this command may be different for XP and P9000 disk arrays. For more information,
see DKCS.
Description
Displays the Client-Host Interface Processor (CHIP) and Array Control Processor (ACP) utilization data
for a given array.
Switches
Required. Specifies the array serial number.–dkc <serial #>
Specifies the delimiter for delimited output.
There is no space between -d and the delimiter character.
–d<delim>
Specifies the labeled and delimited output data.–L
Displays data in a readable format.–hr
CLUI commands24