HP StorageWorks P9000 Performance Advisor Software v5.2 User and Troubleshooting Guide (T1789-96315, June 2011)

DescriptionReplication pair statuses
Volume is not configured for replication activity.SMPLex
Volume is in the Copy mode, where data from the
P-Vol is being copied to the S-Vol.
COPY
Volumes are configured for replication activity.PAIRED
The replication pair volumes are suspended mode.Pair Suspend
The replication pair volumes are suspended, as an
error is noticed with the pair.
Pair Suspend Error
The replication is in a reverse copy mode, from
S-VOL to P-VOL.
Reverse Copy
The continuous access asynchronous side file usage
is over 30%.
Pair SideFile 30% over
Filtering LDEV records
Records in the LDEV table can be filtered in the following ways:
• Filter records based on user specified criteria
• Filter records based on existing selection
• Filter records for values greater or lesser than the specified value
Filter records based on user specified criteria
This type of filter is applicable when you want to view the LDEV data based on the filter criteria that
you specify. If the existing list of LDEV records in the LDEV table do not match the specified filter
criteria, the data is collected from the XP or the P9000 disk array and displayed in the LDEV table.
Following is an example on filtering records in the LDEV ID list:
1. Click the LDEV ID list.
2. In the LDEV ID filter that appears, provide the LDEV ID. You can also enter multiple LDEV IDs in
the following format: CU:LDEV1,CU:LDEV2,CU:LDEV3
3. Click OK.
The LDEV table displays only those records that match the specified LDEV IDs.
HP StorageWorks P9000 Performance Advisor Software User Guide 249