HP XP7 Tiered Storage Manager CLI Reference Guide (TK985-96002, May 2014)

3. Unzip the transferred setup file to the Windows system drive.
After the setup file is unzipped, several files will be stored on the system drive, such as the property
files and the setup, uninstallation, and CLI execution batch files.
4. Execute the setup batch file setup.bat from the command prompt, as follows:
system-drive\TieredStorageManager\Tiered-Storage-Manager-version\Setup\setup.bat
Depending on the OS type, if the execution user does not have administrator permissions, an
error message is displayed and setup terminates. Start the command prompt as an administrator,
and then execute setup.bat.
When setup.bat is executed, the extraction location is checked. If it is executed from a location
other than the folder shown above, an error message is displayed and setup terminates.
The setup.bat file stores and sets up the common library for collecting trace information, and
edits the CLI execution batch file. The common library is stored in the following folder:
system-drive\Program Files\Hitachi\HNTRLib2
Setting up the CLI in a Solaris, HP-UX, or Linux system
This section describes how to set up the CLI if the management client OS is Solaris, HP-UX, or Linux.
Before starting the setup, make sure that the following conditions are satisfied:
• JRE is installed.
• At least 100 MB of unused capacity exist on the drive containing the /opt directory.
To set up the CLI:
1. Log on to the management client as a user who has administrator privileges (root).
Preparations for executing the CLI20