HP P9000 Tiered Storage Manager Software Update 7.2.0-02 Release Notes (TB585-96023, March 2012)

4. Execute the patch (for example, TSM_HP07–02-02P_E01_WIN.exe).
The Self-Extractor dialog box opens.
5. Click the Install button.
If the requirements are met, a dialog box prompts you to confirm the update. Click the Update
button to continue.
6. Start the following services:
• Command View Advanced Edition Suite Common Component
• Device Manager server
• Tiered Storage Manager server
For instructions on starting these services, see the HP P9000 Command View Advanced Edition
Suite Software Administrator Guide.
Update procedure for Linux
1. Confirm that the installed Tiered Storage Manager is one of the product versions listed in
“Prerequisites” (page 7).
Check the version of the Tiered Storage Manager server by referring to the version information
in the GUI. For details, see the online help.
2. Back up the database.
For instructions, see the HP P9000 Command View Advanced Edition Suite Software Administrator
Guide.
3. Stop the following services:
• Tiered Storage Manager server
• Device Manager server
• Command View Advanced Edition Suite Common Component
For instructions on stopping these services, see the HP P9000 Command View Advanced Edition
Suite Software Administrator Guide.
4. On the target server, create a working directory and change to that directory as follows:
[/]# mkdir /tmp
[/]# cd /tmp
5. Copy the Linux update package to the working directory.
NOTE: You must be a superuser to perform the following steps.
6. Restore the update package using the gunzip and tar commands.
In the following example, the file /tmp/TSM_HP07-20-02P_E01_LNX.tar.gz is in the /tmp
working directory.
[/tmp/]# gunzip /tmp/TSM_HP07-20-02P_E01_LNX.tar.gz
[/tmp/]# tar xvf /tmp/TSM_HP07-20-02P_E01_LNX.tar
x UPDATE, ***** bytes, ** tape blocks
x PRODUCT.INI, ***** bytes, ** tape blocks
...
7. Execute the UPDATE command to apply the package that was restored in step 6.
The following message appears and the search for the target product is performed:
[/tmp/]# ./UPDATE
Installation instructions 9