HP XP P9000 for Business Continuity Manager Software Installation Guide

If you specified one of the following in the Business Continuity Manager Monitor YKMONCG file,
you need to grant the view permission to the STGADMIN.YKA.BCM.COMMANDS profile:
• DELETE, MAKE, RESYNC, or SUSPEND for the ACTION parameter
• ADJUST as the startup action for the CGSTARTUPSTATUS parameter
• DUPLEX as the startup status for the CGSTARTUPSTATUS parameter of Business Copy Z or
TrueCopy Asynchronous when NOCANCEL is not specified
In other cases, grant the view permission to the STGADMIN.YKA.BCM.YKQUERY profile.
The following is an example of using the TSO/E command with the FACILITY class:
->SETROPTS CLASSACT(FACILITY)
->RDEFINE FACILITY STGADMIN.YKA.BCM.COMMANDS UACC(NONE)
->PERMIT STGADMIN.YKA.BCM.COMMANDS CLASS(FACILITY) ID(user-ID) ACCESS(READ)
Creating configuration files for Business Continuity Manager Monitor
Before using Business Continuity Manager Monitor, you need to use Business Continuity Manager
to create the configuration files shown below. They should match the configurations of the copy
groups to be monitored from Business Continuity Manager Monitor.
• Disk configuration definition file (mandatory)
• Copy group definition file (mandatory)
• Route list definition file
The route list definition file is required when using the Remote DKC Control function and the
Continuous Access Synchronous Z Consistency Preservation function.
NOTE: If you have already created a configuration file with Business Continuity Manager, then
there is no need to re-create the file.
Creating Business Continuity Manager Monitor parameter files
Before using Business Continuity Manager Monitor, create the following two parameter files:
• YKMONOPT file
A file used to specify options necessary for starting Business Continuity Manager Monitor.
• YKMONCG file
A file used to specify Business Continuity Manager Monitor operations. In this file, specify the
following:
◦ What action to take when a copy group that is being monitored changes to the target
status
◦ What actions to take when executed actions fail
◦ What actions to take when copy groups are not in their specified startup statuses
For details on the format of these files, see the HP XP P9000 for Business Continuity Manager
Software Reference Guide.
Creating a cataloged procedure for startup for Business Continuity Manager
Monitor
This section explains how to create a cataloged procedure for startup for Business Continuity
Manager Monitor.
Creating configuration files for Business Continuity Manager Monitor 75