HP XP P9000 for Business Continuity Manager Software Installation Guide
1
Communication-related messages (YKY300I, YKY301I, YKY304I, and YKY307I) are
output.
2
In addition to the messages that are output when LOGLEVEL(1) is specified, both the
YKY680I and YKY500I messages are output. The YKY680I message is output when an
error occurs during an update request for a copy pair configuration or a copy pair status.
The YKY500I message displays the results of updated configuration files.
3
In addition to the information output with LOGLEVEL(2), BCM logs are output.
Table 29 LOGLEVEL specification and the output messages
Output messagesLOGLEVEL
No output0
YKY300I, YKY301I, YKY304I, and YKY307I1
YKY300I, YKY301I, YKY304I, YKY307I, YKY500I, and YKY680I2
YKY300I, YKY301I, YKY304I, YKY307I, YKY500I, and YKY680I3
AUDITLOG(SYSLOG)
Specifies whether to output audit logs. When specified, the following additional information
will be output to SYSLOG:
• Name and return code of CLI commands that end with an error
• Name and return code of CLI commands that end successfully (only for operational
commands)
Audit logs are not output if the AUDITLOG parameter is not specified.
If the AUDITLOG parameter is specified, operations are performed as if LOGLEVEL(2) or
later was specified.
MODE(startup-mode) ~ ({EDIT|MONITOR}) <<MONITOR>>
Specifies the permission level at which the Business Continuity Manager agent starts.
EDIT
Allows definition, processing, and monitoring of copy groups.
MONITOR
Allows monitoring of copy groups.
LOCK(lock-mode) ~ ({PREFIX|CHECK|NONE}) <<PREFIX>>
Specifies the lock mode of the configuration files. The LOCK parameter is valid only when
MODE(EDIT) is specified. An error occurs if the LOCK parameter is specified when
MODE(MONITOR) is specified.
PREFIX
Locks configuration files based on file name prefixes when the Business Continuity Manager
agent starts. Other users cannot update configuration files that are locked.
CHECK
Does not lock configuration files when the Business Continuity Manager agent starts. When
the Business Continuity Manager agent updates a definition, it verifies that no other user
has updated the configuration file that it is about to update.
NONE
Does not lock the configuration files when the Business Continuity Manager agent starts.
Creating initialization parameters 67