HP XP P9000 for Business Continuity Manager Software Installation Guide

5. Create configuration file datasets.
Create datasets for the following configuration files:
• Disk configuration definition file
• Copy group definition file
For more information, see “Creating configuration file datasets” (page 53).
6. Configure the environment settings for the Business Continuity Manager agent. For details,
see the following sections:
• “Setting the TCP/IP port number” (page 54)
• “Setting up the security for Business Continuity Manager agents” (page 55)
• “Setting up IBM HTTP Server” (page 56)
• “Creating initialization parameters” (page 61)
• “Creating a cataloged procedure for startup for the Business Continuity Manager agents”
(page 72)
7. Start the IBM HTTP Server.
8. Start the Business Continuity Manager agent. For details, see the chapter about linking the
Business Continuity Manager agent with Replication Manager in the HP XP P9000 for Business
Continuity Manager Software User Guide.
9. Configure the Replication Manager initialization settings. For details, see the HP XP P9000
Replication Manager User Guide.
Configuring the environment settings in an existing environment (with Business
Continuity Manager installed)
Figure 6 (page 51) shows the general procedure for configuring the environment settings in an
existing environment with BCM installed (that is, with the storage system configured, and with the
environment set up for using the Remote DKC Control function).
Figure 6 Configuring the environment settings in an existing environment (with Business Continuity
Manager installed)
Overview of environment settings 51