HP XP P9000 for Business Continuity Manager Software Installation Guide

3 Setting up the environment when linking with XP P9000
Replication Manager
This chapter explains the environment setup when linking with XP P9000 Replication Manager. It
also explains how to set up port numbers, security, and IBM HTTP Server, which are all required
to link to Replication Manager. In addition, this chapter explains how to create initialization
parameters and a cataloged procedure for startup.
Overview of environment settings
This section explains how to configure the environment settings that are necessary for linking to XP
P9000 Replication Manager.
HTTPS connections can be established between XP P9000 Replication Manager and the XP P9000
Business Continuity Manager agent. For details on how to establish HTTPS connections, see “Setting
up HTTPS connections” (page 58).
In addition, for details on how to set up IBM HTTP Server for establishing HTTPS connections, see
the product information on the IBM WebSphere Application Server Information Center.
Configuring the environment settings without using the Remote DKC Control function
(before Business Continuity Manager is installed)
Figure 4 (page 48) shows the general procedure for configuring the environment settings starting
from before BCM is installed, without using the Remote DKC Control function.
Figure 4 Configuring the environment settings without using the Remote DKC Control function (before
Business Continuity Manager is installed)
To configure the environment settings without using the Remote DKC Control function:
48 Setting up the environment when linking with XP P9000 Replication Manager