HP XP P9000 for Business Continuity Manager Software Installation Guide

The storage destinations for sample jobs are shown below:
• When installed from installation tape
The sample JCL is stored in a dataset at the destination for the copy operation described in
section “Preparations for installing Business Continuity Manager from a tape” (page 19).
• When installed from CD-ROM
HP.CHYL The sample JCL is stored in the nnn.F1 dataset (the nnn portion varies depending
on the version) after the procedure in “Preparations for installing Business Continuity Manager
from a CD-ROM” (page 19) is performed. If the RECVUPLD job is changed and the output
destination dataset name for the TSO/E RECEIVE command is changed, the sample JCL is
stored in the dataset after the changes.
JCL member names and functions are shown below. The following sample JCL is executed during
a simple installation.
• HPQYKSIN
Copies the content of the provided datasets to the target library.
For examples of modifying sample JCL (HPQYKSIN), see “HPQYKSIN (simple installation)”
(page 87).
Setting up the environment
Table 12 (page 22) lists the items that must be performed to set up the environment. Perform these
items in the order listed in the table.
Table 12 Items that must be performed for environment setup
See:DescriptionItemItem
order
“Settings for using CLI commands in TSO/E
environments” (page 23)
Settings needed for using CLI commands in
TSO/E environments
Settings for using CLI
commands in TSO/E
environments
1
“Settings for using ISPF panels with Business
Continuity Manager” (page 24)
The YKSTART command must be configured
to use ISPF panels with Business Continuity
Manager.
Settings for using ISPF
panels with Business
Continuity Manager
2
“Settings in the ISPF panel” (page 25)The following settings are in the ISPF panel:Settings in the ISPF panel3
• PF key usage
• Command line position settings
• Settings for the number of PF keys to
display
“Settings for using the YKWATCH command
and the copy group definition generation
function for PPRC copy pairs” (page 25)
YKWPROC must be configured for executing
the YKWATCH command and the copy group
definition generation function for PPRC copy
pairs as background jobs.
Settings for using the
YKWATCHcommand and
the copy group definition
generation function for
PPRC copy pairs
4
“Settings for using environment configuration
commands” (page 26)
Settings needed for using the following
environment configuration commands:
Settings for using
environment configuration
commands
5
• YKALCSVC command: Registers a user
SVC.
• YKSETENV command: Sets the Business
Continuity Manager environment variables.
• YKDSPENV command: Displays the
Business Continuity Manager environment
variables.
22 Installing Business Continuity Manager