HP XP P9000 Auto LUN User Guide (AV400-96606, January 2014)

DescriptionTypeItem
CLPR-number:CLPR-name
Indicates the ID of the Thin Provisioning pool.fieldPool ID
Indicates the remaining capacity of the Thin Provisioning pool.fieldPool Remainder
Indicates the capacity of the Thin Provisioning pool.fieldPool Capacity
Manual Plan list
The Manual Plan list contains details of the Manual Migration plans, including information source
volumes and target volumes. This list displays all the manual plans created using the Manual
Migration window.
DescriptionTypeItem
PSUE is displayed in this field if the execution of a migration plan created outside of
Remote Web Console fails. In this case, you must check the status of the application
software which created the migration plan.
fieldStat
"D" is displayed in this field if you attempt to delete a migration plan that is waiting for
execution, or is already in progress. Migration plans indicated by "D" are actually
deleted when you click Apply.
fieldDEL
This field indicates the progress of the Manual Migration plan. The progress value is
updated at one-minute intervals.
field%
An error code is displayed if clicking Apply generates an error. For the error details
and solution, see HP XP P9000 Remote Web Console Messages.
Displays information about source volumes.fieldSource LDEV
Indicates the volume ID of the source volume in this format: LDKC:CU:LDEV. A icon
to the left of the device ID indicates that the volume is being migrated or is registered
in a migration plan.
fieldLDEV
Indicates the emulation type of the volume (VLVI or LUN).fieldEmulation
Indicates the capacity of the volume.fieldCapacity
Indicates the RAID level of the source volume.fieldRAID
Indicates the data protection level of the source volume.fieldProtection
Indicates the parity group ID or the external volume group ID of the source volume. The
number before the hyphen (-) is the frame number. The number after the hyphen is the
fieldPG
group number. If the indicated parity groups are the interleaved parity groups, this item
only displays the ID of the parity group at the top of the interleaved parity groups.
Indicates the type of hard disk drive containing the source volume.fieldHDD
Indicates the number and name of the CLPR corresponding to the source volume's parity
group. The following convention is used:
fieldCLPR
CLPR-number:CLPR-name
Display information about target volumes.fieldTarget LDEV
Indicates the volume ID of the target volume in this format: LDKC:CU:LDEV. The blue
icon indicates a reserved volume of Auto LUN. The green icon indicates a reserved
volume of other programs.
fieldLDEV
Indicates the RAID level of the target volume.fieldRAID
Indicates the parity group ID or the external volume group ID of the target volume.fieldPG
Indicates the type of hard disk drive containing the target volume.fieldHDD
58 Auto LUN GUI reference